Just about everyone will have their own conception when it comes to What Would Cause My Electric Water Heater to Stop Working?.
Several modern homes utilize an electric hot water heater for their heating system, as a result of its ease as well as ease of use. However, similar to any other electrical home appliances, issues may occur with its use, suddenly. It can be truly discouraging to get up to a chilly shower instead of a warm one or having your bath with water that isn't hot adequate or perhaps as well hot. Whatever the instance may be, hot water heater issues can be quite nerve-racking. Luckily, we have actually made a listing of possible options to your water heater issues. There are a variety of elements that could cause a lot of these issues, maybe a problem with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you turn off the main power supply for security. Whatever the issue is, getting it repaired ought to not position too much of an issue if you follow these steps:
Call A Professional:
If after replacing all malfunctioning components and also resetting your temperature level, the hot water heater still isn't working, you may require to get in touch with a professional plumber for an expert viewpoint. The issue with your heating unit could be that the hot and cold faucets have actually been switched over or it might be undersized for the quantity of hot water needed in your home. Whatever the instance might be, a specialist plumber would certainly assist solve the issue.
Check Your Power Supply:
As standard as this may appear, it is very needed. Without ample power, your water heater will not work. So the first thing to do when your water suddenly stops working is to verify that it isn't a power trouble. Examine if the fuse is blown out or the breaker stumbled. If the breaker is the issue, just turn it on and off again. Replace any type of busted or worn-out fuse. Evaluate the device with power after these adjustments to see if it's now working.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't hot enough, you may need to inspect the temperature level setups on your top thermostat. Ensure the circuit breaker is switched off before doing anything. Open up the access panel and press the red button for temperature reset above the thermostat. This must aid warm the water. Transform the breaker back on and check if the issue has been solved.
Examine the Burner in the Hot Water Heater:
If it's not a power trouble, after that attempt checking out your heating element if it is still working. Evaluate each of your heating elements to be sure the problem isn't with any of them. If any of them is faulty, change that component and then check whether the warm water is back on.
Verdict
Hot water heater troubles are not always major. Most of them are due to minor issues like a blown fuse or worn-out heating element. Replacing the malfunctioning components must do the trick. Nonetheless, if you are still incapable to fix the trouble, give a call to your local plumber ahead to get it dealt with.
REASONS YOUR HOT WATER HEATER IS NOT WORKING & HOW TO FIX
Unlike appliances such as dishwashers and washing machines, the hot water heater in your home is used on a daily basis. This appliance is utilized to provide warm water for daily tasks including washing dishes, showering, laundry, and washing hands. Since your family utilizes the water heater on a daily basis, it is not unusual for problems to form. Fortunately, tank-style hot water heaters are engineered with a minimal number of parts. In fact, you may be able to repair a problem with your hot water heater without calling a professional. If your hot water heater is not working, we’ve compiled a list of ordinary issues and how to fix them.
Loose or Damaged In-Line Valve
Unlike a water leak near the bottom of your water tank, a water leak on top of your system can be easily fixed. A common cause of water tank leaks includes a loose in-line valve. This is a handle that is located at the top of the water tank that is engineered to activate or deactivate the flow of water. To fix this problem, you will need to secure the nut that holds the ball or in-line valve in its location. If the leak becomes more severe once it is tightened, you will be required to travel to your local hardware store to purchase a new in-line valve for your water heater.
Damaged Pressure Relief Valve
Most types of water heaters are equipped with a pressure relief valve that is engineered to discharge pressure from the water tank when it becomes too high. If this valve on top of your water heater begins to leak, we recommend purchasing a new one online or from your local store. The process of removing and replacing pressure relief valves is not complicated.
No Warm Water
If you have an electric water heater in your home, the most typical cause of a lack of warm water is a broken heating element. Your water heater is equipped with two heating elements that are tasked with heating incoming water in the water tank. Once a heating element begins to malfunction, you will have little to no hot water to use for showering, cleaning, and laundry.
On the other hand, there are a variety of problems that may stop the production of warm water in a gas water heater. This issue may be produced by a blown-out pilot light or a malfunctioning gas valve. A lack of hot water in your house may also be caused by a damaged thermocouple. Each of these components is able to be easily replaced by purchasing new components. If your hot water heater is not working, you should either purchase new parts or call a licensed plumber to receive help with a water heater repair.
Low Supply of Hot Water
Are you continuously running out of warm water? This issue may be a byproduct of a cracked dip tube. This tube is engineered to push cold water to the base of your water tank to be heated. Once a crack or hole begins to form in the dip tube, the incoming supply of cold water may be released near the top or middle of your tank. As a result, the cold water on top of the tank will be sent to the faucets and showers in your house. This hot water heater problem can only be fixed by replacing the dip tube on your system. Since the process of installing a new dip tube is complex, we recommend calling a certified technician for help.
A low supply of warm water may also be a signal of excess sediment buildup in your water tank. As your water heater reaches the middle of its life cycle, minerals in water including magnesium and calcium will begin to collect at the base of the water tank. As the minerals continue to grow, there will be less room in the water tank to store hot water. To resolve this problem, flush your water heater to remove the excess minerals.
Water is Too Warm or Cold
If the water in your shower feels uncomfortable hot or cold, you can adjust the temperature of your water by changing the settings on your thermostat. Setting the temperature to 120 degrees Fahrenheit may help you save money on your utility bills. This is an excellent temperature to use if you’re worried about scalding or skin irritation. Does this temperature feel too cold? You may also adjust the thermostat to 140 degrees Fahrenheit to make your showers more pleasant. If your hot water heater is not working when you change the temperature, this is an indicator of a broken thermostat. Immediately find a certified plumbing or heating contractor in your area to repair or replace your thermostat.
Low Water Pressure
Low water pressure is not always caused by a malfunctioning water heater. If you live in an older home with smaller water pipes, the flow of water will be restricted prior to reaching our kitchen or bathroom skins. The only way to eliminate this hot water heater problem is to connect new ¾-inch water lines to your system. Another type of problem that may negatively impact your water pressure includes calcium deposits in water pipes.
As magnesium and calcium begin to form in your pipes, the diameter of your water lines will become smaller. As a result, the warm water from your water heater will not be able to travel in an efficient manner to your sinks or appliances. Since the process of replacing water pipes includes removing drywall, an average homeowner that does not have a plumbing license will not be able to fix this hot water heater problem.
Hopefully you enjoyed reading our topic on Hot Water Heater Repair. Thanks for taking time to browse our posting. Make sure you take a moment to promote this article if you enjoyed it. I thank you for reading our article about No Hot Water — Water Heater Repair.
Recurring Service Plans
Comments on “Hot Water System Failure: What to Handle It Properly”